"Vago" (waya clip): umarnin a kan yadda za a yi amfani da

A wayoyi, zaki ya share na lokaci daukan aiwatar da waya sadarwa a maha? Ar kwalaye. Bugu da kari ga aikin abun ciki halittar kwalaye ne rauni aya daga duk lantarki wayoyi, babban ɓangare na Laifi ne ya sa ta bad lamba ko gajarta da'ira su.

Traditional hanyoyin da a haɗa wayoyi

Tarihi mahadi da aka yi amfani da karkatarwa ko dunƙule tashoshi. Yanã mai karkatar wayoyi - mafi sauki da kuma mafi kowa hanyar shigarwa, amma yana da disadvantages:

• Ba za ka iya karkatar da magana, tare da jan kuma aluminum wayoyi.
• Kada a juya stranded wayoyi.
• Stranding size ya kamata a kalla biyar jũya.
• Ba za ka iya karkatar da magana, da wayoyi na daban-daban giciye-sassan.
• Don karkatar da magana, ba ya raunana a tsawon shekaru, shi ne ko dai tafasa, ko amfani da musamman spring-ɗora Kwatancen iyakoki, jan waya solder ana amfani, amma shi ne quite lokaci-cinyewa.
• Wajibi ne a kara ware da Twisted matsayi.
• An ba da shawarar a haɗa fiye da uku wayoyi.

Amfani da wani dunƙule m ne ma iyakance saboda da manyan size da kuma kananan yawan wayoyi da za a haɗa, loosening dunƙule dangane da sau da mana cin lokaci.

Amfani ko rashin amfani da shirye-shiryen bidiyo "Vago"

An madadin Hanyar ne amfani da sauri-hawa tashoshi. Terminal clamps "Vago" da yawan abũbuwan amfãni a cikin wasan kwaikwayon na lantarki aiki:

• Yiwuwar a haɗa aluminum da kuma jan wayoyi.
• Fili na wayoyi na daban-daban diameters daga 0.5 zuwa 4.0 murabba'in mita. mm.
• A amfani da stranded wayoyi.
• Rated yanzu har zuwa 32A.
• A fili zuwa takwas wayoyi a wani rukuni.
• Sauri da kuma sauki shigarwa ba tare da musamman kayan aikin.
• Makaran Lantarki dangane.
• The m size da m block.
• Ganuwa zuwa cikin connection ta hanyar da m casing.
• Wasu model ba ka damar demountable connection.
• A gaban musamman ramuka a cikin gidaje ga gamuwa da instrumentation.

The kawai drawback na wadannan haši ne su farashin, amma shi ne fiye da sakamakon da tanadi a cikin lokaci a lokacin shigarwa, dangane AMINCI da karko. Shi ne kuma zai yiwu a cimma high-yawa hawa da yin amfani da matsa "Vago" (photo nuna da ma'ana a taro na tashoshi a maha? Ar akwatin).

clamps iri "Vago"

Kamfanin samar da m tare da clamping na'urorin na wadannan iri:

• Spring shirye-shiryen bidiyo.
• Shirye-shiryen bidiyo shige-da matsa.
• Shirye-shiryen bidiyo keji Matsa.

Tashoshi da lebur spring tashoshi ne mafi sauki da kuma low-karshen bayani a haɗa shi da wayoyi. Clip wakiltar wani block na karfe marẽmari guga man a cikin polycarbonate jiki. Samuwa a tubalan da yawan lambobin sadarwa daga biyu zuwa takwas. Matsa yi nufi ga guda waya dangane, sake-amfani ne ba kyawawa, tun da spring karfi raunana.

A FIT-matsa clamps amfani mortise lamba (IDC), wanda ya fi sauri wani zaɓi kafuwa. Wadannan na'urori ba da damar dangane da wayoyi ba tare yanã fizge tufarsu.

A tashoshi da clamps keji matsa karfe spring kafa dabam daga wani conductive jan motar. tinned jan karfe da ake amfani da Manufacturing conductive platinum. Wannan matsa aka tsara don amfani da wani wayoyi, ciki har da lafiya da kuma stranded.

A samfurin kewayon

Nomenclature m haši "Vago" (tashoshi, da halaye na wanda muka duba yiwuwar) ne kamar haka:

• 294 da kuma 294 Linec - qware haši don ikon kayayyaki da kuma lighting, tsara don matsa uku conductors: lokaci, sifili da m duniya.
• 224 - jerin to connect lafiya-stranded conductors na lighting maras motsi zuwa ga rarraba cibiyar sadarwa.
• 243 Tura Waya - don a haɗa m conductors na kananan giciye-sassan.
• 2273 m Tura Waya - yi amfani to connect wani wayoyi a maha? Ar kwalaye.
• 273 da kuma 773 Tura Waya - Connect m conductors a cikin shigarwa kwalaye.
• 222 - Universal Mahara tashoshi don a haɗa wani wayoyi da giciye sashe na 0,08 mm square.
• 221 WAGO Karamin - duniya tashoshi na rage girma ga mahara sadarwa na wani wayoyi da giciye sashe na 0.2 mm square.

Bari mu bincika a cikin mafi daki-daki Vago shirye-shiryen bidiyo. Yadda za a amfani da tashoshi na kowane jerin?

Haši Series 294 da kuma 294 Linect

Terminal tubalan amfani da wadannan jerin clamps Tura-a keji Matsa ka damar gama aya,, aikin ruɓanyar da lafiya-stranded conductors ba tare da yin amfani da kayan aikin na musamman. Optionally, kai tsaye lamba na m duniya PE iya zubar karkashin haši da amfani ga hade tare da PE bas a lokacin shigarwa. A ciki gefen wani cikakken aikin fili na uku lamba ga kowane iyakacin duniya sashe daga 0.5 zuwa 0.75 murabba'in mita. mm. The m PE-iyakacin duniya za a iya sanye take da wani waje lamba da PE (m duniya). Don haša na'ura da za a haɗa a kowane rukuni da aka bayar tare da uku matsa sashe 0.5-0.75 mm square. Wadannan clamps wayoyi "Vago" shigar kamar haka:

• Rarraba rangadi zuwa wanda fitilar dole a haɗa a layi daya ko cewa load da aka yanke.
• Cheroots waya rufi an cire kan wani tsawon 1 cm.
• Click a kan motsi ɓangare na m da kuma shiga danda waya a cikin bude rami m ga iyakacin duniya har ya tsaya a nan ba.
• Saki m part Vago tashoshi matsa kulle waya.
• Haša tsayarwa wayoyi da kai-kulle da lambobi daga kowane iyakacin duniya.

Domin sauƙi na shigarwa, kowane m iyakacin duniya da aka alama tare da Latin haruffa L, N, PE.

Products 224 Series

Wannan clip "Vago" - domin stranded conductors na lighting maras motsi ko wasu low-halin yanzu kaya. Thin shugaba lighting na'urar za a iya haɗa ko dai karshen a cikin rata na rarraba cibiyar sadarwa. Kowane m da aka tsara za a haɗa daya iyakacin duniya na lantarki cibiyar sadarwa. Wayoyi rarraba cibiyar sadarwa - 1-2.5 mm square da kuma haɗa na'urar -. 0.5-2.5 mm square. kowane iyakacin duniya sashe daga 0.5 zuwa 0.75 mm². Girkawar daga cikin tashoshi da aka yi a cikin wadannan jerin:

• Lokacin da za a haɗa da dispensing line karya da wadata igiyar da aka yanke.
• Cheroots waya rufi an cire kan wani tsawon 1 cm.
• Waya rarraba cibiyar sadarwa suna saka a cikin zagaye rami cleat lambobi.
• Click a kan m rabo daga clip da kuma shigar da danda waya na tsayarwa a cikin rami don kulle square siffar.
• Saki da m rabo daga clip, clip kulle waya.

Tashoshi 243 Series

243 Series "Vago" (Tura Waya matsa) ne amfani da low-ƙarfin lantarki na'urorin Accession m waya na kananan giciye-sashe daga 0.5 zuwa 0.8 mm sq. Shin ultra-m size. Model samuwa to connect daga uku zuwa takwas wayoyi. A maras muhimmanci irin ƙarfin lantarki na na'ura - har zuwa 100V, matsakaicin halin yanzu - har zuwa 6A.

Clamps 273 da kuma 773 jerin

Wadannan jerin articles "Vago" (Tura Waya matsa) an tsara don hawa guda conductors a rarraba kwalaye da kuma daban-daban iyakar sashe conductors: 2.5 mm square. ga 273 jerin kuma har zuwa 4 mm square. domin 773rd. Matsakaicin canja halin yanzu kayayyakin - har zuwa 32A.

Clamps 2273 Series

Series 2273 tashoshi da lambobi Karamin Tura Waya bambanta m size cewa da gaske Yake rufẽwa da kafuwa. Yanzu load wadannan shirye-shiryen bidiyo - har zuwa 24A. Maras iyaka ya hada da kayayyakin ga gamuwa na zuwa takwas wayoyi. Yana yarda da m, aluminum ko jan conductors 0.5 to 2.5 mm sq.

Ploskozazhimnye tashoshi 243, 273, 773 da kuma 2273 series aka taru da hannu ba tare da yin amfani da kayan aikin musamman a cikin wannan jerin:

• A iyakar da wayoyi suna kwace a tsawon 10 mm.
• Bare waya iyakar aka saka duk hanyar shiga cikin m takware.
• daidai shigarwa ne sarrafawa ta hanyar da m gidaje cover tashoshi.

Products 222 da kuma 221 jerin

Shirye-shiryen bidiyo na wadannan jerin bambanta a size da kuma irin gidaje. A na'urorin ba da damar yin wani tattaro mahara shugaba giciye sashe na 0,08 mm ga 222 jerin, kuma daga 0.2 zuwa 4.0 mm sq. (Domin 221 jerin). Zabuka suna samuwa ga gamuwa na biyu, uku kuma biyar wayoyi. Matsakaicin matsa halin yanzu - 32A. Series 221 ne kerarre da wani alkawari daga gidaje tare da wani m murfin.

Hawa shirye-shiryen bidiyo da hannu:

• A iyakar da wayoyi suna kwace a tsawon 10 mm.
• Tashi levers a orange a cikin m tsiri "Vago" clip yana buɗewa da bude daga cikin spring lamba.
• Bare waya iyakar aka saka duk hanyar shiga cikin m takware.
• Levers saukar da zuwa ta asali matsayi, sakewa da clamping lamba bazara da waya.
• Ga kayayyakin na 221 jerin iya sarrafa ingancin shigarwa ta hanyar wani m jiki.

Janar umarnin shigarwa

Terminal clamps "Vago" an yadu amfani a duk faɗin duniya da kuma tabbatar da su tasiri. Duk da haka, kana bukatar ka bi wasu sauki jagororin lokacin da installing:

• A duka kaya dukkan Lines da alaka da daya m kada wuce ta rated halin yanzu. Yana da kyawawa don ko da yaushe zabi m tare da wata wadata halin yanzu.
• Tsayar da samfurin data - matsakaicin ƙarfin lantarki kewayon giciye sassan na wayoyi da su irin.
• Girkawar daga cikin tashoshi da dole ne a za'ayi kawai a rarraba (Box).
• Junction kwalaye ya kamata a sanya a cikin wani m wuri don dubawa.
• Koyaushe bar ajiye na waya ishe sake kafuwa.
• Lokacin yanã fizge tufarsu da iyakar da wayoyi ta amfani da musamman alamomi yi azãbar a jiki tashoshi. Daidai danda wayoyi da damar da kyau yi su kafuwa a cikin tashoshi.
• Lokacin da hawa da aluminum conductors amfani da musamman manna, ban da aluminum hadawan abu da iskar shaka.
• Don sarrafa irin ƙarfin lantarki a cikin tashoshi saka connect da mita da sanya ramuka a cikin matsa jiki.

Fiye da shekaru 35 na electricians a duniya amfani da clamps "Vago". Reviews gamsu masu amfani a kan yin amfani da wadannan kayayyakin magana don kansu.