Beam biyu-Tee: Girma. I-katako katako katako

Bim amfani a yi a lõkacin da gina rassanta, ceilings, benaye , da sauransu. D. Akwai wani iri-iri iri. A mafi m jinsuna ne na katako - musamman zane, a giciye-sashe wanda ya mayar da harafin "H". Wannan ginin da kayan sanya daga karfe Can ko katako.

Karfe I-katako

Tare da a saki wannan nau'in za a iya amfani da a matsayin birgima carbon da low gami karfe. Aiwatar da na-bim a yankunan da yawa na} ungiyoyin da kuma masana'antu yi. Yawanci wannan abu da ake amfani da, idan ya cancanta su bayar da firam tsarin ko kuma wani daga cikin sassa ƙara ƙarfi ne, kuma rigidity. Akwai na-katakanta, suka welded kerarre da zafi mirgina. A karshe ne mafi mashahuri.

ASIC ƙarfi a cikin wannan abu akwai wani amfani. I- joists ne sosai resistant zuwa da zazzabi hawa da sauka. Saboda haka, da suka sukan kuma yi amfani da shiri na unheated dakuna.

bigiren

Amma, Beam biyu-Tee, girman wanda zai iya bambanta, a yi amfani da gina benaye a gina masana'antu da kuma} ungiyoyin gine-gine. Shi ne kuma wani irin haya ne sau da yawa amfani a lõkacin da gina gadoji da kuma ga ƙarfafa na mahakar. Very yadu amfani da wannan Mother samu a mota ginin da mota masana'antu.

Siffofin I-bim

Wannan irin ne classified birgima ba kawai ta hanyar da yi, amma kuma a kan ƙayyadaddu na yi. A katako iya samun biyu-Tee kamar layi daya shelves, da kuma zubar a wani kwana. A karshen harka, da haya ne zuwa kashi:

• musamman,
• al'ada (tare da shelves gangara daga 6 zuwa 12%).

Musamman na-katako (Gost 19425-74), bi da bi, suna kasu:

• yi nufin karfafa shaft (alama da harafin "C");
• amfani a cikin yi na ƙarya hanyõyi ( "M").

Katakanta da layi daya flanges (Gost 26020-83) ya kasu kashi:

• al'ada (alama "B"),
• shigo (W),
• hasumiyar (K).

Har ila yau, karfe I-bim zai bambanta bisa ga kauri daga shelves da katangu.

Beam biyu-Tee: Girma

A tsawo daga wannan giciye-bangaranci view of birgima kuma iya samun daban-daban. Wannan adadi ne gyara baki da kuma sanin da yiwu ga katako lambar. Saboda haka, a tsawo na 140 mm a matsayin kayan da za a yi alama 14C a 360 mm - 36M, da dai sauransu ...

Specific girma na yi abubuwa na irin wannan mirgina aka ƙaddara daga musamman Tables. Daga cikin wadannan, yana yiwuwa a san da nauyin da I-masaƙa.

Legend:

• b - da nisa daga cikin shelves,
• t - ta talakawan kauri,
• S - bango kauri,
• h - tsawo na wani I-katako,
• R - Ciki radius daga curvature,
• R- radius shelves.

Bugo katakai

Wannan irin na kayan gini, kamar karfe, an halin high ƙarfi da kyau kwarai yi. Jumper H-katako katako, sau da yawa, Ya sanya daga plywood ko OSB, shelves - daga Planed kaya maras amfani. Akwai kuma wani nau'i ne na plywood. A wannan yanayin, haƙarƙari abubuwa veneer laminate. Gam na-bim ne kasa mai saukin kamuwa zuwa Rotting. Bugu da kari, su ne mafi wuta resistant.

Haɗa zuwa juna I-bim aka yi da itace da musamman baka. A karshen kunshi layi daya karfe faranti da kuma kulle na'urar. Haši iya samun daban-daban masu girma dabam. Idan dole, zai zama da sauki kunshe zaɓi, fi dacewa dace da tsawo daga cikin kankare bim.

Bigiren amfani

Used biyu-Tee katako, katako, yafi a cikin shiri na gine-gine na firam-garkuwa. Har ila yau, wannan abu ne sau da yawa bauta a matsayin wani goyon baya tubali slabs, block da kuma m kankare gidajensu. A benaye ana aza a kan joists wannan nau'in halin high rigidity, kada creak kuma ba lanƙwasa.

Tare da yi na rufi na manyan gine-gine da aka yi da na-katakanta, suka rafters za a iya sanya doki. Wannan gwada sabon abu zai iya samu nasarar maye gurbin al'ada amfani da wannan karshen, katakai, da karfe kyawon tsayuwa, kankare slabs. Yawanci, da manufacturer bada lamuni a kan na-bim a kan duk Lines daga cikin tsarin da sabis.

samfurin Amfanin

A abũbuwan amfãni daga biyu-Tee katako katako aka kafa. Wannan abu ne bambanta da irin wannan fasali kamar:

• Ƙarfi. I-bim za a iya shigar a sosai dogon takware.
• Girma kwanciyar hankali. Wadannan bim ba tanƙwara, kuma ba batun shrinkage da nakasawa.
• Sauƙi na shigarwa. Rike wannan gini abu na iya zama al'ada sassaƙa kayan aikin.
• Versatility. Amfani da wani katako da biyu shelves iya zama a wani bene yi, benaye, ganuwar, rufi da kuma kama. D.
• Lightness. Weight Na-katako aka yi da itace ne kawai 3-4 kg. Don ta da irin wannan kashi, misali, rufin ba ya bukatar musamman kayan aiki. Make shi iya kawai mutane biyu.
• Low cost.

girma abu

Tare da gina gine-gine za a iya amfani da daban-daban katako biyu-Tee. Its size, sau da yawa amfani a yi, su ne:

• tsawon - 241, 302, 356, 406 mm,
• shiryayye nisa - 64 mm,
• flange kauri - 38 mm.

Tun da yake wannan abu ne sau da yawa amfani a cikin taron jama'ar, rufi a sosai m takware, shi ne wani lokacin dole don gina. SNIP aka yarda. A cikin gidajen abinci na biyu bim a lokaci guda zapilivaem kwa'di. Ƙarin kayyade aka yi a kan kusoshi.

A general, ginin abu ne sosai m da kuma high quality - katako na-bim. Gost, kamar yadda a cikin hali na karfe jinsunan, shirya rabo na tsawo da kuma size of abubuwa na da irin wannan goyon bayan. Duba su a cikin na musamman Tables.

Ta yaya zan-katako a cikin gida

Idan so, da irin wannan shiri za a iya kerarre kuma a gida. Wannan na bukatar da biyu mashaya sashe na akalla 35h25 mm. Jumper sanya daga plywood ko OSB. Za ka kuma bukatar wani lantarki ko wani chainsaw. Aiki ne da za'ayi a cikin wadannan tsari:

• Da farko, a cikin sanduna tare da dukan tsawon sawed tsagi zurfin 10% na tsawo daga cikin lintel.
• Su sa'an nan a yanka su da ake so tsawon, kuma sanded.
• Sa'an nan, kasan kowace kwarin kunya aikace-aikace na m.
• Running fili bim pairwise amfani plywood ko OSB.

A karshe mataki da ƙãre katako don sa a karkashin latsa. Don yin shi ma zai yiwu da kansa. A saboda wannan dalili, tashar sanduna. Suna sanya a kan shelves da kuma cire tare ta amfani da bindigogi, ko belts.

Kamar wancan ne samar da ginin abu ne da yawa mai rahusa fiye da sayan Beam biyu-Tee. Farashin na karshen iya canza a kusa da 200-250 rubles. Tattara da kanka shi zai zama daraja shi a cikin 1.5-3 sau rahusa.

Aluminum I-bim

Gina irin wannan abu ma yana inganta ƙarfi. Biyu-Tee katako da aka yi da aluminum gami yawanci AD31. Wannan nau'in aka fi amfani da shi a yi gidãje. Har ila yau bim aka sanya daga aluminum gami 1915. Wannan irin yana high ƙarfi. Aluminum bugo karfi da kuma m fiye da karfe katako.

abu iri-iri

Akwai aluminum I-bim:

• taurare,
• annealed,
• shekaru.

A shafi kayan iya fentin, SUS, foda, electrophoretic, a biyu-Layer hadaddun. Bisa ga yanayin amfani aluminum I-katakanta, kazalika da karfe, za a iya raba shigo, shafi da kuma al'ada. Lakabtawa a wannan yanayin yana amfani da wannan.

girma

Aluminum biyu-Tee katako masu girma dabam kuma iya zama daban-daban. Girma a cikin wannan yanayin ne m da Gost. Yadda ya kamata sanya da kuma lakabtawa. A tsawo daga cikin aluminum katako iya bambanta daga 10 zuwa 100 cm a farko idan bisa ga Gost rajimanti zai yi nisa na 55 mm kauri -. 4.5 mm. Ƙayyade da rabo daga cikin sigogi a kowane hali ba za a iya Tables.