Ƙirƙiri sauki alama ma'auni hannuwansu

Akwai darajan kokarin tattara surface ma'auni hannuwansu? Idan ka lissafa kudin kaya da kuma aiki lokaci wanda ya kamata a ciyar a kan halittar wannan na'urar, amfanin ba haka ba ne bayyananne. Duk da haka, da AMINCI kantin sayar da na'urorin na ajin ne da yawa m fiye da abin da zai samar da wani gida da aka yi surface ma'auni, don haka shi har yanzu sa hankali su yi shi da manufacturer.

Ana amfani da makanikai, kazalika a karfe da kuma itace. Tare da shi amfani da workpiece equidistant alama line zane canjawa wuri zuwa workpiece, da ake amfani da rantsuwa, a sassaƙa da joinery. Hakika, da gidan wani batu a ƙoƙarin sa inji Thicknesser, duk fada bayanai zo don samar da wani sauki hannu kayan aikin.

Making

Saboda haka, abin da za ta yi don yin sa alama ma'auni hannuwansu? Nice to suna da akalla kadan kwarewa a aiki tare da karfe, idan ba - kira wani mataimaki wanda za su iya hannu zuwa gare ku a cikin wannan al'amari. Lokaci aikin zai dauki wani kadan - game da sa'o'i biyu. Amma ga kayan, sa'an nan ku tabbata shirya da wadannan:

• solder tagulla.
• taps 4 mm.
• kashi na karfe a cikin nau'i na harafin "T" 3.5 x 7 cm.
• hex shugaban dunƙule 4 x 8 mm;
• a tube diamita na 8 mm da kuma 16 mm (5 cm a tsawon).
• dunƙule da gefen guda size.
• «rago 'dunƙule 6 x 8 mm;
• wani ƙarfe zagaye sanda a giciye sashe na 8 mm diamita, 60 cm tsawon;
• cikin knurled dunƙule 6 x 4 mm.

Na kayan aiki da za ka bukatar:
• lantarki rawar soja.
• taps.
• dama faranti.
• soldering baƙin ƙarfe.

A muka ambata a sama T-dimbin yawa karfe yanki da ciwon girma na 35 mm da 70 mm, shi ne babban bangaren na ma'auni. A ta tsakiyar ɓangare wajibi ne a daidai rawar soja a rami diamita na 8 mm sa'an nan soldered zuwa tube. A m diamita na tube shi ne 16 mm da kuma na ciki rami (kai) - 8 mm.
Kafa ta hanyar da tashar a kan wanda ya slide da karfe sanda. Its tsawon ne 30 santimita da diamita daga cikin bututu daidai da darajar (8 mm). Daya ƙarshen sanda ne a haɗe da wani zobe matsa. Ana amfani da kayyade fensir, wanda zai ɗauke da markings. An madadin iya samar da wani ƙarin rami, inda famfo trehmillimetrovogo diamita aka saka.

A daura da ƙarshen tube yin wani rami 6 mm a diamita a Threaded vint- "Dan rago", wanda kuma ake kira gyara. Ya aiki zai zama don kulle sanda a matsayi.

Daga karshen da sanda, inda da fensir clip lazimta ma soldered zobe sanye take da wani matsin lamba dunƙule. A m da ciki diamita daidai da na 16 mm da kuma 8 mm. The m sanda biyu ya fadi na sukar ramukan, daya daga wanda yake shi ne ta hanyar trehmillimetrovy, kuma yana da diamita, da kuma sauran wa kulle dunƙule 4 zuwa 6 mm, kuma yana da thread M4.

Har yanzu shi ne zama dole rawar soja biyu wurare kawo karshen T-dimbin yawa tushe, Threaded M4. A nan, da dunƙule za a sanya tare da knurled dunƙule tip, wanda za a yi amfani da matsayin alama ma'auni kamfas.

Idan ka shawarta zaka yi amfani da taps 3 da 4 mm, a tabbatar kaifafa burinsu. Lokacin da taro maras motsi kammala, fenti da surface ma'auni hannuwansu da taimako na musamman Paints for karfe. Unpainted bar kawai ƙananan (aiki) part.

Kananan inganta sanya a cikin ma'auni zane, zai taimake bugun sama da tsari na striping. Just bukatar sa a kan sanduna da fayil millimeter sikelin.

Amfani da alamar ma'auni, tare da hannuwanku ka aikata shi, ko sayi shirya, tuna:
1. A cikin itacen m karkatar da gubar fensir.
2. Lokacin da jawo Lines kan sheet karfe tushe lebur surface na ma'auni dole slide tare gefen da takardar.