Decking: kauri da takardar masu girma dabam, iri, nadi

M, hur kuma m decking, wanda kuma ake kira trapezoidal takardar, sami tartsatsi yau kuma ya sami shahararsa daga mutane da yawa masu amfani da. Amfani da aiki abu, yana yiwuwa ya gina wani gareji, a sito ko wani shagon. Decking yana da yawa iri, tare da daya daga cikinsu, ba za ka iya ko da yaushe oblitsevat bango, gina wani shãmaki, ko shinge, kazalika da sauki gina wani rufin.

Duk da haka, babban karfin da smartness - wannan ba shi ne kawai halaye ga wanda ya zama wajibi a zabi abu. Bayan duk, ya aka quite kawai zama transportable, da kuma a kan isowa za ka iya zuwa ga 'yan sa'o'i, don ƙarfafa takardar da kai-tapping sukurori.

The main iri

Profiled wanda kauri iya zama daban-daban, akwai wani na kowa alama halayyar dukan jinsin profile. Muna magana ne game da murfin, wanda zai iya zama a matsayin mai sauki, ko polymeric. By sauki shafi kamata a fahimci galvanized Layer.

Ko da a cikin samar da tsari da kayan za a iya mai rufi da ado da kuma m polymeric shafi. Ganin iri-iri na bayanan martaba, shi za a iya lura da cewa, shi yana da nasa zurfin, siffar da nisa. Wadannan siffofin ƙayyade da ƙarfi, kuma stiffness na takardar, da barin yin amfani da karfe takardar a yi filin.

Yana da daraja ambaton cewa corrugated jirgin, da kauri da kuma girman da takardar da za a ambata a kasa, da samar da ta nagartacce ta kowane manufacturer. Wannan ya nuna cewa wadannan halaye za su iya bambanta.

Manufa Profile C8

Irin wannan takardar yana da wani corrugated surface kuma yana da ƙananan ƙarfi idan aka kwatanta da profiles aka bayyana a kasa. A yanar gizo iya galvanized ko rufi. A sayarwa ne zane-zane da mafi sau da yawa launin ruwan kasa, ceri, fari, blue ko duhu kore.

Idan rufin yana da wani babban isa gangara, wannan abu za a iya amfani gudãnar da wani rufin. Ana amfani da karin matsayin cladding ga ganuwar da kuma a cikin shiri na fences. Profiled C8 za a iya amfani da shi don yin rufi, idan yana da wani m purlin. Yi amfani da matsayin abu iya zama wani tsarin memba a yi na wucin gadi Tsarin da gine-gine wadda suke sauri yi fasaha.

Wannan decking iya underlie da yin rufi a lokacin da wani galvanized Layer. Bayan sayi corrugated karfe takardar, za ka iya saka shi a cikin wani firam tsarin. Stained takardar da galvanized m Layer za a iya amfani da shi don gina panel da kwasfa Tsarin. Ƙarin wuraren aikace-aikace ne:

• Karfe fences.
• revetment bango yi.
• sheeting katangu.
• abubuwa prefabricated sanwic bangarori.
• abubuwa na kumshin sanwic constructions na ganuwar, partitions, ceilings da wuta kariya halaye.

Idan ya zo ga fences, ya kamata ka saya a profiled C8, wanda yana da wani tutiya shafi kare da polymer.

Girma da kuma halaye corrugated C8

Profiled wanda kauri iya bambanta a cikin kewayon 0.5 zuwa 0.7 mm, da nisa daga 1200 mm. Game da tsawon, shi dabam daga 0.5 zuwa 12 m. Working takardar nisa ne 1150 mm da kuma profile tsawo ne 8 mm. Mataki profile daidai da 115 mm kuma wani nauyi na 1 ^m2 na takardar ne 4.5 kg. Wannan gaskiya ne idan da kauri ne 0.5 mm. Tare da wani kauri daga 0.7 mm to 1 m ² nauyi ya 6,17 kg.

Ganawa Profile C10

Profiled kauri wanda za a ambata a kasa, za a iya labeled C10. A wannan yanayin, shi ne a corrugated takardar, wanda yana da rage yawan ƙarfi. Corrugation yana da wani trapezoid siffar, da kuma canza launi da sutura takardar ne guda kamar yadda a cikin sama hali.

Wannan irin profiled takardar amfani ga yin rufi na'urar da manyan kwana na son. Aiwatar da abu zai iya zama domin gina fences, shi ya dace domin samar da wani pre-qirqiro gine-gine, outbuildings kuma ta gine-gine. Amfani ga Manufacturing da karfe takardar qazanta sassa, partitions na sanwic bangarori, wanda kare gine-gine da wuta.

A m kauri daga corrugated C10 ne 0.4 mm. Active kayan amfani a cikin farfadowa daga yin rufi a kan wanda wani akwaku suya tare da wani farar na 0.8 m. Dubi C10 iya zama ma a matsayin tsarin kashi a gina karfe Tsarin for daban-daban dalilai.

A size da kuma halaye na trapezoidal takardar C10

Profiled galvanized, kauri 0.5 mm, - ne talakawan darajar. Matsakaicin siga kauri ne 0.8 mm. Dangane da tsawon na takardar, shi dabam daga 0.5 zuwa 12 m, da jimlar aiki nisa daidaita da takardar 1150 da kuma 1100 mm, bi da bi. Profile tsawo daidai da 10 mm da nisa tsakanin profiles ne daidai to 115 mm. Murabba'in mita na takardar kauri daga 0.5. 0.6. 0.7. 0.8 weighs 4.6. 5,83; 6,33; 7,64 kg bi da bi.

Ganawa Profile C18

Wannan corrugated jirgin, da kauri, iri wanda aka bayyana a cikin labarin yana da wani nau'i na corrugated ko Ribbed abu. Yana yana da kananan kauri, wanda damar zuwa yanka da kuma rawar soja shi ne quite sauki. Daban da kuma launuka na polymer shafi kamar irin waɗanda na sama profiles. Ado sakamako ne quite high, don haka da C18 ne na kowa a cikin farfadowa daga fences da kuma fences. Dace trapezoidal takardar rufin, wanda a baya aza lath a increments na 40 cm ko kasa. ne ƙarin yankunan amfani:

• liyi ceilings.
• bango ado.
• da erection na panel kayayyaki.
• gini partitions.

Lokacin amfani da profiled takardar domin rufin decking gangara dole ne 25 ° ko kasa.

A size da kuma halaye na C18 Profile

Wannan yin rufi decking, wanda girma tare da tsawon iyaka dokoki daga 0.5 zuwa 12 m, mai kauri daga 0.4 zuwa 0.8 mm. A duka da aiki nisa daga cikin takardar shi ne 1023 da kuma 1000 mm, bi da bi. Profile tsawo ne 18 mm. Lokacin da kirga load a kan rufin iya bukatar wani siga kamar nauyin daya murabba'in mita. Idan takardar kauri ne 0.5. 0.6. 0.7. 0.8, da nauyi da murabba'in mita kasance 5.18; 5,57; 7.13 da kuma 8,11 kg bi da bi.

Ganawa Profile C21

A kauri daga cikin corrugated yin rufi C21 kasance iri guda kamar yadda a cikin sama hali. Wannan abu ne mai corrugated takardar, wanda surface iya samun trapezoidal ko haƙarƙari form. A zane da aka kare da lalata:

• Prism.
• polyester.
• polyurethane.
• puralom.

Found ta baza C21 don rufe rufi tare da battens, da abubuwa na wanda aka cire ta 80 cm ko kasa. Lokacin da idan aka kwatanta da baya bayanan martaba, da trapezoidal takardar C21 iri da ake amfani da rufi da kuma gina fences, gine-gine, gona da gine-gine da kuma Tsarin. A kayan yana da high ƙarfi, kuma shi ne m, wanda shi ne gaskiya idan aka kwatanta da baya profiles.

ne yankunan da amfani:

• gawa tsarin.
• da kuma kare garkuwa tsarin.
• bango constructions.
• da matsanancin ganuwar kananan gine-gine da irin cinikayya haimõmi, mai amfani da dakuna da kuma garages.
• abubuwa prefabricated sanwic bangarori.

The girma na takardar profile C21

A takardar kauri aka ambata a sama, da tsawon kasance iri guda da kuma dabam daga 0.5 zuwa 12 m. A total aiki nisa da takardar ne 1051 da kuma 1000 mm, bi da bi. Profile tsawo ne 21 mm da nisa tsakanin profiles ne daidai da 100 mm. Tare da wani kauri daga 0.5. 0.7. 0.8 mm, nauyi da murabba'in mita kasance 5.14; 7.13; 8,11 kg bi da bi.

Iri na 2 mm sheeting a kan Manufacturing dabaru, tsawo da kuma siffar da profile, kazalika da kayan

Profiled 2 mm ne kerarre da daya daga biyu fasahar:

• sanyi mirgina.
• zafi birgima karfe.

A cikin farko idan da P 52146-2003 kasa nagartacce, alhãli kuwa a karo na biyu - P 52246-2004. Yana yiwuwa a rarraba kayan ko da a tsawo na profile. Wannan siga zai canza, wanda kayyade hatimi da iyaka adadin 10 zuwa 114 mm. The kuskure canja a samar da adadi jere daga 1 zuwa 2.5 mm.

Idan ka saya takardar da hakan flexi tiyo, za ka sami kayan high stiffness, wanda za a iya amfani da a yi na load-hali Tsarin. Subdivided karfe takardar 2 mm lokacin farin ciki da za a iya kara dimbin yawa profile, shi yana iya zama:

• wavy.
• rectangular.
• square.
• trapezoidal.

A samar da bakin ciki takardar karfe za a iya amfani da zafi galvanized, aluminum-mai rufi, silico-kare da wani electrolytic tutiya shafi. Wadannan iri corrugated hukumar kerarre daga kumshe wadansu abubuwan karfe wanda aka kare ta polymer Layer.

Iri sheeting dangane da irin m shafi

Mafi sani coatings amfani kare profiled takardar za a iya kasu biyu kungiyoyin: tutiya ko aluzinc mai rufi, da kuma shafi polymer qagaggun. A sauki m substrate ne tutiya. Ta yi zafi hanya. Wannan ya nuna cewa takardar da aka tsoma a zubi tutiya, da cimma samar da wani Layer kauri daga 25 zuwa 30 microns.

Daga m abubuwa kare alyumotsinkovym shafi. An mafi resistant, wanda kuma ake kira Galvalume. Kamar yadda wani ɓangare na uku aka gyara: tutiya, aluminum da silicon. A karshen ake bukata domin sadarwa na farko biyu karafa. Trapezoidal takardar da aluminum-tutiya fili amfani a cikin kariya daga waɗanda yankunan birnin da cewa, da yawa daga aiki karauka. Dace da irin wannan abu don gidan rufi a seaside ko a cikin masana'antu zone.

A karshe, a kananan

Na profiled samu ta tartsatsi a cikin zaman kansu da kuma masana'antu yi domin dalilai da yawa. Daga cikin su ya kamata a alama: karko, sauƙi na shigarwa, lalata juriya, sauƙi na sufuri da zamani zane.

Idan kwatanta da m karfe takardar guda kauri, da profiled tushe zai samar da mafi flexural ƙarfi, wanda wani lokacin kai 3.5 ton. Dutsen da siffa takardar to akwaku ko mutum sassa na gine-gine da yin amfani da kai-tapping sukurori. Zanen gado ne resistant zuwa dukan yanayi da kuma lalata, mikawa su sabis rayuwa.