Na gida hunturu baits for perch. yin spinners

A fadi da kewayon kama kifi lures a kan predator ba dame da masunta, saba shekaru na tinkering da hannunsa. Don shawo kansu cewa store sayi baits fi kyau na gida, kusan ba zai yiwu. Amma suna da ɗan dama. Da fari dai, mai kyau koto, musamman idan m ne ba cheap, kuma abu na biyu, dama tafarkin ne ba ko da yaushe zai yiwu in saya, da kuma uku, masana'antu spinners - ba irin mai wuya aiki.

Bari mu yi kokarin fahimtar wadannan masunta, sana'a da kuma kai-samar da wasu hunturu lures domin kama kifi ga perch. Bari mu fara da wasu sauki DIY, ba ya bukatar soldering da karfe. Hotuna da na gida spinners, sauki zuwa tsirar da suke rare aka jera a kasa.

Pilker daga wani cokali

Pilker - wani nauyi kama kunkuntar bakin karfe cokali, jan, tagulla, nickel azurfa da sauran karafa, talauci amenable don lalata. Ana amfani da hunturu tsaye trolling babban perch da walleye.

Domin yin sauki pilker, muna bukatar:

• al'ada teaspoon na bakin karfe, ko cupronickel.
• hacksaw.
• fayil.
• rawar soja.
• sandpaper.
• biyu daga Tuddan zobba.
• sau uku ƙugiya.

Da farko muna bukatar mu tantance girman gaba spinners. Idan ka shirya kari ga babban perch, pilkera tsawon kasance 4-7 cm. Bayan yankan tare da hacksaw girbi da ake buƙata size, tweak shi da wani fayil da yashi da lafiya sandpaper. Bugu da ari, shi wajibi ne rawar soja ramukan a gefuna da workpiece. A daya hannun, inda da nisa daga cikin workpiece more ta hanyar tsaga zobe kugìyàr Tee so size. All pilker shirye. Wadannan na gida hunturu baits for perch aikin da kyau a matsakaici zurfin (3-5 m) a cikin ruwan da matsakaici igiyoyin.

Baubles na hanzaki

Irin wannan koto za a iya sanya daga al'ada hanzaki, a cewa ta aiki ne yawanci amfani da lantarki da kuma hams. Amfani da wani hacksaw a yanke daga daya blank rabo hanzaki 3-5 cm dogon haka da cewa shi aka hada da 2/3 kashi santsi da 1/3 na grooved. Next mu gyara fayil, kara sandpaper da kuma rawar soja ramukan don ƙugiya da gubar. Zaka kuma iya kala koto a so launi da taimako na al'ada ƙusa goge. Kananan na gida hunturu baits na hanzaki ne mai girma domin kama kifi "matrosika" a m zurfin.

A sauki haske tafarkin na tin

Wannan tafarkin ne sau da yawa amfani da yan koyo Okuneva kama kifi gluhozime. Ta misali iya da kansa tabbatar da cewa catchability na gida baits za a iya sanya ko da daga gaskiya cewa kwance kewaye da underfoot. Domin wannan mun bukatar:

• tin (giya, kofi, gwangwani kaya, da dai sauransu ...).
• Metal almakashi.
• biyu daga Tuddan zobba.
• ko biyu Tee size № 7-8.
• AWL.
• sandpaper.

A wani al'ada takarda yin m juna tsawon 40 da nisa 20 mm. Yanke da kuza, da daidaita shi. Tare da wani shirye-sanya template zuwa karfe tare da wani AWL hannu a kan ta contours. Yanke workpiece. Tare da gefuna a spinner da wani AWL sa ramukan don iska-up zobba da hankali kara duk, yin kawar da Paint, magudi da kuma burrs.

Next gaba trolling kamata tanƙwara. Wannan za a iya yi da attaching da workpiece ga talakawa kitchen mirgina fil. Sa'an nan acikin sarƙa iska-zobba da ƙugiya.

Na gida hunturu kantin sayar da irin wannan spinners for perch ba kauri daga karfe daga wanda an yi su ne, dole ne a rabu da sauran baits, ko su kawai rasa siffar da kuma zama unusable.

Blesna na tube

Catchability kankara kama kifi tafarkin for taguwar predator za a iya sanya ta a al'ada tube na jan karfe ko bakin karfe tare da diamita na 5-10 mm. Isa ya auna tsawon 30-50 mm, yanke diagonally daga garesu, a hankali sanded da kuma Yaren mutanen Poland shi zuwa wani haske. Next, kana bukatar rawar soja ramukan don a Tuddan zobba, su kuma acikin sarƙa da ƙugiya.

Similar na gida hunturu baits for perch sukan yi amfani da lokacin da kama kifi a cikin m yankunan da matsakaici halin yanzu.

Shirya spinners

Babu shakka, da aka bayyana a perch koto sanya tare da nasu, ba za a iya kwatanta matsayin wasan da mallakar tajirai. An abar zane, da kashi ne m da kuma nauyi karkata a kowace hanya adversely shafi hali na spinner a ruwa. Amma duk da haka kafin faruwa a kama kifi tafarkin daraja gwajin da kuma, idan ya cancanta, gyara.

Wannan za a iya yi kai tsaye a cikin baho cike da ruwa, kuma ko da ba tare da wata kama kifi sanda. Trolling bukatar su ɗaure zuwa layin ya kuma nutse a kasa. Abin da ya bi shi ne ya sa mai kaifi kalaman, don haka da cewa koto dauke 30 santimita da kuma ganin yadda shi zai nuna hali, nitsewa. Idan tafarkin da dama zuwa kasa tsaye ba tare da yin wani motsi a kusa da axis, sa'an nan ya ajiye shi ba daidai ba. Yawanci, irin baits da lankwasawa biyu a wani kwance, kuma a tsaye jirgin sama, da kuma canji podgruzki nauyi.

Baubles "dovetail"

Yanzu bari mu matsa zuwa mafi hadaddun kayayyaki, samar da aikin tare da karfe da kuma solder. Duk wani gida tafarkin domin kama kifi a kan predator, ya bayyana a wasan aiwatar da wani da-tsare zane. "Dovetail" - shi ne ba togiya.

Na kayan da kayan aikin zai zo a m:

• 90h30h0,5 mm jan takardar.
• Metal almakashi.
• soldering.
• solder.
• AWL.
• Soldering acid.
• jan karfe waya sashe 0,6 mm;
• guda ƙugiya № 4-6.
• fayil.
• sandpaper.

Kafin ka yi a cokali, kana bukatar sanin da size. Domin humpback ta din yawanci 90 mm, da nisa - 15 mm.

A kan takardar da jan alamar up da V-siffar ne 90 mm tsawo da kuma 30 mm m mai wutsiya-yanke 25 mm. Yanke shi tare da kwane-kwane da almakashi. Pre-zalunta daya surface na da solder acid soldering baƙin ƙarfe sa a kan shi na bakin ciki Layer na solder.

Tare da dinki gudanar a tsaye axial line kuma lankwasawa da workpiece halves. Next wutsiya faranti kawo tare a hanyar da muka juyo da kama jirgin ruwan. Bayan nan, solder su ga juna a ciki.

Na jan karfe waya yin madauki da cewa za a iya amfani da abin da aka makala wani igiyar su ko leash. Its matsakaicin diamita kada ya wuce 3-4 mm. Solder shi zuwa ga shugaban (narrowest) rabo daga preform. Bayan wannan tsari da acid ƙugiya, kuma kamar yadda gyara shi a raya spinners. A lokacin da duk wannan da aka yi, zuba dukan ciki surface na solder preform.

Yanzu shi ne bi da bi a fayil da sandpaper. All nodules, barbs da tududa dole ne a hada kai, da kuma jig kanta ne ƙasa da kuma goge su da wani babban mai sheki.

Yawanci, wadannan na gida hunturu baits for perch amfani domin kama kifi a cikin ruwa. Ga manyan zurfin soldered guda ƙugiya dole ne a maye gurbin m Tee na wannan size.

Baubles "torpedka"

Wani sauki darasi a yadda za a yi trolling for perch a cikin gida na wannan kayan. A takardar yin wani juna a cikin hanyar elongated droplets 30-50 mm. Da nisa daga cikin workpiece a cikin sama ɓangare dole ne 10 mm, kasa - 3-5 mm.

Sauye juna daga takarda zuwa sheet karfe da kuma sa biyu m preform. Next, ta amfani da wani taso da harbe-harben fil kuma wani lokacin farin ciki roba sanya su shahararren a ko'ina cikin yankin. A ciki surface na biyu halves aka bi da tare da acid da kuma mai rufi da bakin ciki Layer da solder. Waya yi 2 madaukai da solder su zuwa iyakar daya daga cikin workpieces. Next, ƙara sama da biyu halves na convex bangarorin zahiri da kuma haɗa su da juna, wucewa a kusa da gefuna da soldering baƙin ƙarfe. A sakamakon haka, dole ne mu kama dogon saukad. Bayan wannan tafarkin ne trimmed kuma goge su da wani haske.

Na gida "kastmaster"

A catchability "kastmestera" - almara spinner for tsaye kama kifi daga "Acme", ya sani, watakila ma mafi uninitiated angler. Amma 'yan mutane gane cewa, irin wannan koto ne mai sauki yi da mafi yawan niƙaƙƙun ne yawanci jan tube diamita na 6-8 mm. The fi girma da giciye-sashe, da ya fi tsayi, kuma da wuya a samu baubles. Bayan da tube za bukatar:

• Makaranta protractor.
• hacksaw.
• soldering.
• Soldering acid.
• solder.
• fayil.
• sandpaper.
• rawar soja tare da wani bakin ciki rawar soja.
• Clockwork zobe.
• biyu ko sau uku ƙugiya yawan 7-8.

Tare da wani protractor zuwa wasu batu a tube, da kuma nuna a fakaice zana farko line cewa kara zuwa dama a wani kwana na 17 digiri. Bugu da ari, turawa bar protractor 2-3 mm, zana biyu line tilted ta 23 digiri.

Hankali hacksaw yanka da tube a kan shirya zane. A sakamakon haka, ya kamata mu samu wasu irin elongated QFontDatabase wanki. Mun aiwatar da solder preform acid a ciki, ciko da ciki sarari na solder washers. Bayan haka, mu tsabtace cokali, kuma niƙa. Ramukan ake fadi na sukar clockwork zobe a nesa na 2-3 mm daga gefen koto.

Na gida hunturu spinner type "kastmaster" yin la'akari 1.5-5 grams da ake amfani da anglers kama kifi "matrosika" a kananan zurfin. Irin wannan baits ƙila za a yi amfani da su girma ya fi girma kifi: humpback, perch, Pike. Kan aiwatar da Manufacturing guda kamar yadda aka bayyana, kawai diamita na tube a kan manyan predator daidai da dole ne mafi girma (10 zuwa 25 mm).